Certain Restrictions May Apply

HOW IT WORKS:

Automatically redials the last number you dialed, and will continue to redial it for 30 minutes or until it connects.

How to use:

1. When you hear a busy signal, press and release the “switchhook.” Listen for a special tone.

2. If you’ve already hung up, lift the handset and listen for a normal dial tone.

3. Press *66 (rotary phones, dial 1166).

4. If the line is still busy, hang up. Your phone will check the number for up to 30 minutes.

5. A special callback ring alerts you if the line becomes free (some phones ring normally).

6. Lift the handset to automatically place the call.

To cancel your Callback request:

1. Press the “switchhook” and release. Listen for a special dial tone.

2. If you’ve already hung up, lift the handset and listen for a normal dial tone.

3. Press *86 (rotary phones, dial 1186).

4. Listen for the confirmation tone or announcement and then hang up.

Notes:

• To start the 30-minute clock, repeat steps 1-4 under “How To Use.”

• Does not work on 800 numbers, 900 numbers, numbers outside the specified service area, or on lines where Call Forward and some other call services have been activated.

• The “switchhook” is the button the handset pushes down when you hang.

up the phone. Some phones have a Link or Flash key you can press instead.

• Call Return will be placed on your line in conjunction with this feature.

Was this article helpful to you?

Comments are closed.